Removes water, oil and solid particles.
Compact and light weight..
No Electricity used.
All aluminium resist oxidation and scale formation.
Large surge chamber.
Vortex filter eliminates 100% water in liquid phase. Air is termed as dry air as long as there is no water in liquid condition Vortex filter thereby assuring 100% liquid water free air ie.dry air.
This process does not lower the dew point. Any cooling after the vortex filter will result in condensation. Hence these dryers are to be used near the end use machines (ie.less than 4m).
In the first stage coalescence takes place as wet and dirty air is made to spin and tumble through an in depth-bed made of stainless steel line wire. Moisture in the air condenses into droplets by centrifugal force. Which along with other contamination travel down the wire to the bottom of the filter cartridge and on to honeycomb structure water subsequently drains out.
In the second stage air enters a lightly wound filter elements made up of highly absorbent long staple cotton backed by SS wires for mechanical strength. When the streamlined flow of air is intercepted by the filter elements it breaks down into small vortex shedding small micro vortices are formed with a vaccum where water particles are trapped. Then the water particles disintegrate and evaporate.
Oil droplets coalesce in the first stage, while oil vapour is absorbed by the second stage elements, effectively removing 99% of oil content. A filtration efficiency of 100% is achieved for solid particles of 5 micron size and 50% for 1 micron size.
|Max. Working pressure||15 kg/ cm sq|
|End connection||1/2' BSP|
|Size (H X B X D ) mm||200 X 100 X 50|
|Air Inlet Condition||Max. Fluid Temp 70 C|
|Material of construction||Extruded Aluminum|
|Sealing||Polyurethane & Nitrile Rubber|
G M AIR TECH SOLUTIONS
#52, Rajgopal Nagar Main Road,
Peenya Industrial area,
Peenya 3rd Stage,
Bangalore - 560 058
All Right Reserved To GM Air Tech Solutions
Site by Websmartindia